Z-Breathe is a proprietary algorithm engineered in the Z2 to smooth out the breathing cycle while enjoying the benefits of CPAP treatment. Typically users experience pressure swings while breathing on a CPAP device. Pressure swings occur as a spike in pressure during exhalation and a drop in pressure during inhalation. Z-Breathe is designed to minimize…
If you are having trouble connecting an iPhone 11 to Nitelog and have a Z1 or Z2 manufactured before June 1, 2020, you may need to upgrade your firmware. All Z2 Auto CPAPs manufactured after June 1, 2020 have the new firmware already installed. The new firmware only corrects a connection issue between the iPhone…
Hold the DOWN arrow button until a pressure reads (will be flashing). Use the UP and DOWN arrow to adjust the pressure and then hold down the middle power button until you see the word “accept” on the LCD screen. Please note: you must set the ramp time before setting the ramp pressure. If the…
Hold down the UP arrow until 00 minutes is flashing. Use the UP and DOWN arrows to choose the time you would like (5 minutes, 10 minutes etc.). Once your desired time is selected and flashing hold down the middle power button until the LCD screen reads “accept” (LCD screen should now show a bar…
To change the date and time on your CPAP, go to the following link, and download the “Z1 Auto Firmware Upgrade” program onto a PC computer. http://breas.us/cpap-user-guides-and-software/ Next, open the upgrader shortcut on your desktop, plug the Z1 into a power supply, and connect the Z1 to the PC using the USB cable that was…
You can change the date and time on your Z1 or Z2 Auto, by connecting it to our Nitelog app on an iPhone/iPad or most Android devices. The app should prompt you to sync to the local date and time upon start up. If it does not, or if you accidentally hit “no” when prompted,…
ON: Press and hold the UP ARROW while plugging the power cord into the end of the Z1/Z2 until the LCD screen reads – bt-on OFF: Press and hold the DOWN ARROW while plugging the power cord into the end of the Z1/Z2 until the LCD screen reads – bt-off
By law we are unable to distribute the instructions to change the pressure settings for patients. If you have questions on the appropriate pressure on your device, please contact your prescribing doctor and/or sleep specialist. If you are a prescribing doctor and/ or sleep specialist, call us at 855-436-8724 so we can send you the…
You can change the date and time on your Z1 or Z2 Auto, by connecting it to our Nitelog app on an iPhone/iPad or most Android devices. The app should prompt you to sync to the local date and time upon start up. If it does not, or if you accidentally hit “no” when prompted,…
Your Z1 or Z2 should have been set to the specific pressure(s) stated on your prescription. You will need to call the provider you purchased your device from to discuss this further, as they hold your prescription. If you want to bring your Z1/Z2 to your local doctor or licensed therapist, we can email them…